Use the same Scale on Y axis and Secondary axis
How can I use the same scale in a chart?
12 replies
-
The point of a secondary axis is that it has its own scale. If you don't want a different scale, put both measures on the primary axis.
-
If i do that creates 2 charts in the same chart :-(
-
, to fix this:
- Delete the "Values" chip from the "Trellis" dropzone. As an effect one of your two measure chips in the "Values" drop zone will disappear.
- Drag the measure chip which just disappeared, move it to the three points right of the "Values" drop zone and choose "Primary axis" in the pop up.
Hope this helps!
Micha -
after point 1
after point 2
:-(
-
-
Done! :-)
-
its possible to show days with no data?
-
-
Hi ,
Adding to the good answers you received from our members, I'll refer you to our Help page which explains how to use such Combo Charts.
-
The link you shared doesnt have the solution for my issue... i want the same scale
Thank you!!!
-
, read on - just a little bit further...
-
Oops, I obviously was a little late, sorry!
At first, I hadn't seen the posts from the meantime.
-
The Y-axis scale is automatically set to be above the Max value of the measure/s on it. If you want both sides (Y1 & Y2) to have exact same scale range you can manually set it for both through the Formatting Panel
-